Protecto-AutoKare is a two pack system in which both components are mixed thoroughly before applying. Mixing ratio is 1:4 by volume. Add any suitable thinner such as 'ProtectoCoat - Thinner102' to bring the viscosity down. Apply two / three coats of Protecto-AutoKare by spraying (at 1.8 kg/sq. cm. pressure) keeping a gap of around 4 -5 hours between coats. Allow the final coat to dry thoroughly. Full scratch hardness is achieved after 4 days.
Spirit or alcoholic solvents should not be used as thinners for Protecto-AutoKare. We recommend 'ProtectoCoat - Thinner 102' if you wish to thin Protecto-AutoKare. To avoid whiteness and dull appearance of coatings, ensure that the compressor is drained completely and the compressed air is free of moisture.
|